I have have been using these speakers for both music production and home listening for around 6 months, they have been absolutly fantastic. When I purchased the speakers brand new, one of them arrived with one of the small limiter lights not working, apart from this, the pair are in excellent/perfect condition. Buyer must collect from Saltdean, 10 minutes outside Brighton.

Price: £200 ONO.

I have attached the full monitor spec etc. below:

OVERVIEW:
The new TAPCO S8 is the loudest, most accurate 8inch active studio monitor in its class, with a big low-end response especially well suited to modern rock, hip-hop and dance music styles. Compare to the competition and hear for yourself. The S8 gives you more of a very good thing.

MAIN FEATURES:
Mackie-designed active desktop monitors with dual high-precision internal amplifiers (60w x 60w) 8 inch woofer delivers big, punchy low-end especially suited to modern rock, hip-hop, dance music production 1-inch waveguide-loaded silk dome tweeter with exceptional stereo imaging for smooth, non-fatiguing mix sessions Low-Freqency Boost and High-Frequency Boost/Cut controls allow for acoustic tailoring to different rooms Balanced TRS/XLR and unbalanced RCA inputs Magnetically shielded, can be placed next to your CRT monitor Outperforms other 8inch active monitors in its class.

SPEC:
Acoustic Performance:
Free Field Frequency Response: 40 Hz 20 kHz (±3 dB)
Lower Cutoff Frequency: -3 dB @ 40 Hz
Upper Cutoff Frequency: -3 dB @ 20 kHz
Sound Pressure Level @ 1 meter, 7.5 dBu into Balanced Input: 100 dB SPL @ 1m
Maximum SPL Per Pair: 113 dB SPL @ 1m

Transducers:
Low Frequency: 8 in/203 mm with steel frame, polypropylene cone woofer
High Frequency: Wave guide loaded 1 in/25 mm silk dome tweeter

Amplifiers:
Low Frequency Power: 60 watts, 4 ohm load, 100 watts peak
High Frequency Power: 60 watts, 4 ohm load, 100 watts peak
Slew Rate: > 15 V/µs
Distortion (THD, SMPTE IMD, DIM 100): < 0.035%
Signal-to-Noise Ratio:
Low Frequency: > 101 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
High Frequency: > 93 dB, 20 Hz to 20 kHz, unweighted, referenced to 60 watts into 4 ohms
Type: Monolithic IC, Class AB

Electronic Crossover:
Crossover Type: 24 dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 kO, balanced bridging; 10 kO unbalanced

Equalization:
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, peaking
High Frequency EQ: ±2 dB @ 5 kHz, shelving

AC Power Requirements:
-US: 120 VAC, 60 Hz
-Europe: 240 VAC, 50 Hz
Korea (AC Power Select at 240 V): 220 VAC, 60 Hz
Japan (AC Power Select at 120 V): 100 VAC, 50/60 Hz
AC Connector: 2-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6 A H/250 V
230 VAC: T 800 mA H/250 V
Power Consumption: 80 watts with music, loud mix
20 watts quiescent (idle)

Physical Dimensions and Weight:
-Enclosure: 0.625 in/16 mm thick MDF with 1.0 in/25 mm MDF front panel
-Damping: Adiabatic fiberfill

Dimensions:
-Height: 16.2 in/411 mm
-Width: 11.6 in/295 mm
-Depth: 13.8 in/351 mm
-Weight: 35.2 lb/16.0 kg

Contact details

• Email: Click here to reply to this ad
• Phone: Dominic on 07828199876

Anti spam: Do NOT contact me offering services or anything of a commercial nature.